+
  • aVlFSS23T8aRO-B0Q_POSQ.jpg

UHF partial on-line monitoring system

ZY-PDM1000U-G GIS UHF partial discharge online monitoring system consists of internal and external UHF sensors, signal processing unit, high-speed data acquisition and conversion unit, and background analysis software.

Category:

UHF partial on-line monitoring system

Keywords: online monitoring system | partial discharge detection


Product Description

  ZY-PDM1000U-G GIS / ZY-PDM1000U-T transformer UHF partial discharge online monitoring system
  ZY-PDM1000U-G GIS UHF partial discharge online monitoring system consists of internal and external UHF sensors, signal processing unit, high-speed data acquisition and conversion unit, and background analysis software.
 
  System functions:
  1 Record the basic characteristic parameters of partial discharge such as amplitude, phase and frequency of partial discharge signal. Record the change trend of discharge amplitude and frequency, phase synchronization can choose internal synchronization or external synchronization;
  2 Record discharge characteristic spectra such as partial discharge phase distribution map (PRPD), pulse sequence phase distribution map (PRPS), phase-amplitude map, discharge amplitude, and discharge frequency trend chart;
  3 The system can automatically identify typical partial discharges in GIS (free metal particle discharge, floating potential body discharge, creeping discharge, internal air gap discharge of insulators, metal tip discharge, etc.);
  4 The system test data can be connected to the background system of the protection manufacturer, which can be customized and developed according to the requirements of different manufacturers;
  6 The software system is easy to operate and powerful;
  5 standard case (4U height), flexible installation position, can be installed in the HSB cabinet, indoor and outdoor separate case. Plug-in acquisition card design, flexible configuration and optional channel number, easy to expand.
 
  System Features:
  1 High-gain design, gain up to 40db, out-of-band suppression -40db; FPGA-based high-speed data acquisition system, sampling frequency up to 125MS / S.
  2 PRPS map display adopts adjustable display angle design, which can display 3D map from various angles; PRPD map shows data accumulation and adjustable amplitude, which is convenient for diagnosis and analysis; hierarchical alarm settings, the same alarm signal will not repeat the alarm;
  3 The data can be connected to the relay protection system of the manufacturer, which meets the IEC61850 communication standard, which is convenient for maintenance personnel to operate.
 
1
 
  System parameters:
 

Power supply voltage

AC220,50/60HZ

System detection range

0.3---1.5GHZ

Minimum input signal

-75dbM

Number of channels

2/4/6Or customize

Size

4U

Installation method

HS cabinet, standard cabinet, wall-mounted, custom cabinet

EMC

level 4

Communication method

Network port / optical port

Output result

Discharge phase, amplitude, frequency, type

 

+

Intelligent detection is a major issue for the planning and construction of the ubiquitous electric power Internet of Things system by the State Grid Corporation of China. It is also a key application for solving the problem of interconnection and data sharing of the operation inspection system. It is also an important basis for the practical application of big data analysis for equipment inspection.


+

A transformer is a device that uses the principle of electromagnetic induction to change AC voltage. The main components are a primary coil, a secondary coil, and an iron core (magnetic core). The main functions are: voltage conversion, current conversion, impedance conversion, isolation, voltage stabilization (magnetic saturation transformer), etc. It is a key device in the power system. Generally, transformers rarely fail. Once a certain defect occurs inside the transformer equipment, equipment failure is extremely easy to occur. Therefore, strengthening and improving the operation monitoring of transformer equipment is of great significance for ensuring the safe operation of transformers.


+

DXK-ZY high-voltage charged display is a new type of device to prevent electrical misoperation. It is an inductive (non-contact) high-voltage charged detection device. The device has advanced design, reasonable structure, complete functions, safety and reliability. It has functions such as flashing display, audible alarm, fault self-test and activation of forced blocking circuit, etc., and has high sensitivity and reliability. This device is suitable for outdoor (also suitable for indoor) electrical network or equipment with AC 50Hz and rated voltage of 40.5 ~ 1100kV, and it is used to reflect the charged condition and prevent electrical misoperation. The device is installed on the line grounding knife switch, the bus grounding knife switch and the busbar pressure change grounding knife switch


ONLINE MESSAGE